Haltech Elite 1500 Mitsubishi EVO 8 plug and play ECU kit

$2,010.00

Get the most out of your 4g63 by fitting your Evo with a Haltech Elite 1500 Plug-n-Play ECU Package. The Mitsubishi EVO 4-8 is a proven platform for Motorsports and the PnP Haltech elite 1500 offers full tuning flexibility with DBW support, closed loop knock control and flex fuel. Launch control and rally style antilag support are also standard features with all our elite 1500 packages.

2 in stock (can be backordered)

SKU: halHT-150945 Categories: ,

Description

Haltech Mitsubishi EVO 4-8 (5 Speed) Elite 1500 Plug-n-Play ECU Package. The PnP Haltech elite 1500 delivers Motorsports performance at a budget friendly price point. This is the perfect ecu package for any serious Evo build looking for a flexible ECU that delivers reliable performance.

  • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU FEATURES
  • Drive by Wire Throttle Control (DBW).
  • Low Impedance Injector control with programmable injector peak and hold currents and programmable peak time.
  • Flex fuel support (Direct sensor input). Tune your engine’s boost, fuel and ignition by ethanol content.
  • Flexible tuning setup for Petrol (Gasoline), Methanol and Ethanol.
  • Closed Loop 02 Control. Dual bank control for precise tuning (with optional external CAN O2 Wideband Controller Kit).
  • Knock Control. Synchronised to engine position with high speed digital filtering for accurate detection.
  • Variable cam control – Independently control up to 4 camshafts.
  • Closed Loop Idle Speed Control with learning for consistent idle stability.
  • Long term learning (auto tune) on fuel, ignition, cam, boost and idle control maps (up to 4D).
  • On-board data logging. Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
  • Laptop data logging. DLog all available channels directly to your laptop’s hard drive for both tuning and diagnostics.
  • Dual CAN Bus communication for Haltech dashes and expansion devices. Supports OEM CAN and OBDII. View live engine data and set/clear diagnostic trouble codes.
  • 1 – 4 Injection stages with individual injector flow rates per injector.
  • Anti-Lag/Rotational idle for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions.
  • Rolling Anti-Lag. Lock to your current or pre-set RPM or road speed for roll racing or pit lane limiting.
  • Launch Control. Control your engine’s power delivery, RPM and boost for consistent performance at the start line.
  • Traction Control. Control your engine’s power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
  • Tuning table resolution up to 32 x 32 x 8
  • Limitless tuning flexibility. Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user-definable corrections.
  • Per Cylinder Tuning Correction – 3D
  • Wideband O2 Control. Connect up to 9 channels via CAN expansion devices.
  • Thermocouples/EGT (Exhaust Gas Temperature). Connect up to 12 channels via external CAN expansion devices.
  • Advanced Engine Protection. Set multi-level limits for sensors and protect your engine against common causes of failure.

RACE FUNCTIONS
  • Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays and banked control options. 3D fuel and ignition corrections for all stages.
  • Boost control. Intelligent 4D closed loop learning with flexible, user-definable axis and 14 fully user-definable corrections.
  • Sequential turbo control
  • CO2 boost control. Wastegate pressure and position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer.
  • Flat shifting. Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
  • Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery.
  • Timer functions. Use the combination of the race timer and 5 additional programmable timers for time-based control of multiple engine parameters, power delivery and other user definable functions.
  • Trans brake function allows smooth and consistent control of start line staging (Bump or Creep).

Additional information

Weight 3.8 kg
Dimensions 12.5 × 9.6 × 5.5 cm
air_freight_prohibited

false

not_carb_approved

true

ltl_freight_required

false

prop_65

Unknown

epa

Failed/Race Only

Brand

Haltech

ALL Haltech orders get an extra 5% off, guaranteed lowest prices!

Coupon code: Haltech-5

Haltech produces some of the industries best electronics including standalone motorsports grade ECU, TCU, Loggers and Digit dash displays. Here at FFrides we are proud to offer you the full Haltech product line at the guaranteed lowest price around! If you have any questions or need any assistance choosing the right Haltech ECU or accessory don't hesitate to contact our team of specialists. We have years of hands on experience with the entire Haltech product line.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…