Exedy Universal Builder Series Triple Metallic Clutch Does NOT Incl FW Req. Custom Clutch Actuation

$1,931.43

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used with any of the available flywheels or with your custom made flywheel to match an EXEDY kit to virtually any transmission. All EXEDY Hyper Builder Series kits all come with HD clamp load and a push type diaphragm for use with a 44-54mm release bearing. The lightweight cerametallic clutch discs are all 200mm diameter with solid hub for reduced mass and high torque holding capacities. Clamp load on every kit is a pedal friendly 2653, which holds 615 torque on twin setups and 923 torque on Triples. All EXEDY Racing Hyper Builder Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.
Hyper Multi-Plate Clutch Kit; Triple; Metallic; 200mm.; Push Type; 24 Tooth/26mm Spline; Wheel Torque Rating 923 ft./lbs.; 2653 lbs. Clamp Load;
Builder Series Triple Metallic Clutch Kit; Does NOT Incl Flywheel; Require Custom Clutch Actuation

Available on backorder

SKU: exeHMR300 Categories: ,

Description

The new EXEDY Hyper Builder Series allows the racer or custom car builder to assemble a clutch kit to fit their specific application. These kits are similar to our Hyper Multi Plate kits, but are supplied WITHOUT a flywheel. The Builder Kits can be used with any of the available flywheels or with your custom made flywheel to match an EXEDY kit to virtually any transmission. All EXEDY Hyper Builder Series kits all come with HD clamp load and a push type diaphragm for use with a 44-54mm release bearing. The lightweight cerametallic clutch discs are all 200mm diameter with solid hub for reduced mass and high torque holding capacities. Clamp load on every kit is a pedal friendly 2653, which holds 615 torque on twin setups and 923 torque on Triples. All EXEDY Racing Hyper Builder Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.
Hyper Multi-Plate Clutch Kit; Triple; Metallic; 200mm.; Push Type; 24 Tooth/26mm Spline; Wheel Torque Rating 923 ft./lbs.; 2653 lbs. Clamp Load;
Builder Series Triple Metallic Clutch Kit; Does NOT Incl Flywheel; Require Custom Clutch Actuation

Brand

Exedy

Additional information

Weight 36.38 kg
Dimensions 13 × 12.3 × 3.5 cm
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Unknown

epa

N/A

upc

651099026367

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.